Recycling PVC plastics using a PVC Pelletizing Extrusion Machine is the safest way to recycle at this stage because it does not change the material’s physical properties or expose it to chemicals.
The granules produced can be reinjected into drinking water pipes, construction pipes, electrical conduits, drilling pipes, etc.
PVC Pelletizing Extrusion Machine Product Description
Screw Feeder
Pvc pelletizing is usually done with crushed or crushed and cleaned flakes, which can be fed more evenly with the use of a screw device.
Main feeder (volumetric)
Motor power: 4kw
Part in contact with material: SUS304
Stirring screw at the bottom of feeder to avoid material clogging
Feeding hopper with liquid level indicator
Single Screw Extruder
Screw:Screw diameter 160mmL/D ratio 33/1Maximum speed 120 rpm
The speed of the cutting blade is automatically adjusted according to the melt pressure in the die head to ensure uniform pelletization.
cutting blades are pneumatically pushed and fit perfectly and tightly to the mold surface
Automatically adjusts the pressure of the cutting blade on the mold surface by means of a high-precision pressure sensor to ensure uniform cutting force.
Water ring pelletizing system
1. Automatically adjust the speed of the granulating blade until the final uniform particles appear
2. Knife feeding adopts a pneumatic device to ensure good contact between the blade
For blade and mold, the knife’s pressure is automatically adjusted to ensure that the cutting force of the knife is uniform.
One key start system makes the whole system run more smoothly and conveniently
Horizontal pelletizing
Pelletizing power:3kw
Water pump power:5.5kw
The pelletizing system adopts frequency conversion speed regulation
